eta VIENTO, User Manual

Page: 23 / 52

– At first switch the iron ON to maximum temperature and let the iron at least 10 minutes
running without water . The iron may produce slight smoke, which is cased by burning
of used lubricants and seals in steam chamber. This is normal situation and does not
form the reason for warranty claim.
– During first filling of the tank with operating water it is recommended to release the steam
from whole tank outside the ironed fabric.
– Make sure that the power cord is always dry, not damaged and did not get into contact
with a hot iron!
– Regularly check condition of the appliance power cord.
– The power cord must not be damaged with sharp or hot objects, open fire, it must not be
sunk into water or bent over sharp edges. Never put it to hot surfaces, prevent its free
hanging over edge of table or work board. Touching, stumbling or pulling the power cord e.g.
by children may cause tipping over or falling of the appliance with subsequent severe injury!
– The appliance is portable and it is equipped with a movable connector with a plug which
ensures double-pole disconnection from power supply.
– If you need to use the extension cord, it has to be uncorrupted and it has to comply with
the valid standards.
– WARNING : There is a risk of injury in case of incorrect use (not in accordance with the
manual) of the appliance.
– All text in other languages and pictures shown on the packaging, or the product itself, are
translated and explained at the end of this language mutation.
– The producer is not responsible for damage caused by improper use of the appliance
(e.g. burning, scalding, fire, clothes damage, scratching, ironing plate
contamination
) and its guarantee for the appliance does not apply to situations when
the safety warnings above are not complied with.
II. DESCRIPTION OF THE APPLIANCE (Fig. 1)
A – ironing plate H – thermostat regulation wheel
B – additional spray jet I – water container
C
– filling hole lid
J
– SELF CLEAN button
D
– steaming regulator
K
– rest board
E
– additional spray button
L
– space for power cord wind-up
F – steam shock button M – power cord
G – control light N – handle
O – filling cup
III. INSTRUCTIONS FOR USE
Remove all the packing material and take out the iron with the accessories. Remove any
labels, protective foils or covers from the ironing plate before the first use. Make sure that
the power cord is not damaged and that it does not lead any sharp or hot surfaces. The
electric socket must be easily accessible so that the stean iron can be easily disconnected
from power supply if danger appears.
Ironing temperatures
– Sort laundry and iron according to the instructions for treatment (e.g. manufacturer’s
recommendation - the label on clothes ). If the instruction is missing and you know the
material of the clothes, follow the table on picture 3. The table applies to basic materials
only, not to possible decorations, material treatment, etc.
23
GB
/ 49