Problem
Cause
Solution
Iron does not
create steam
There is no water in the container Pour water into the container
Steaming regulator is in
0
position Move the regulator into the steaming
position
Low temperature is set for
activating the DRIP-STOP
function
Use the regulation wheel to set
a temperature, during which you can
use steaming and wait till the iron is
heated for using it
Iron does not
create steam
shock
Low temperature is set for
activating DRIP-STOP function
Use the regulation wheel to set
a temperature, during which you can
use steaming and wait till the iron is
heated for using it
The function of steam shock was
used too often during a short
period of time
Let the iron heat and wait for a while
before using the electric shock
function again
Sprinkling
equipment
(additional spray)
does not sprinkle
water
There is no water in the container Pour water into the container
The water system is aerated
Tighten finger on the additional spray
jet hole and at the same time press the
sprinkling device button several times
Water is dripping
from the ironing
plate
The lid of the pouring hole of the
container is not closed properly
Close the pouring hole lid
Low temperature is set
Use the regulation wheel to set
a temperature, during which you can
use steaming and wait till the iron is
heated for using it
The steam shock function was
used when temperature below
ooo was set
Use the regulation wheel to set
a temperature ••• or MAX
The SELF CLEAN button was
pressed during ironing
Do not use the SELF CLEAN function
After finishing ironing, the iron was
put into the horizontal position and
the steaming regulator is not in
0
position
Move the steaming regulator to
0
position, empty the container and put
the iron into the rest position
Flakes and other
impurities are
peeled off the
ironing plate
Contrary to recommendation
undiluted water is used with
excessive hardness
>15 °N
Use water diluted with distilled water
Clean the iron using the SELF CLEAN
function and steam shock
Brown liquid is
pouring out of the
ironing plate
Improper chemical agents were
used for removing scale
Do not add any chemical agents into
the water container for removing scale
You use one of the types of water
that we do not recommend
Use only common clean drinking water
for filling in the container, or water
diluted with distilled water
Fibers from linen got into the
holes in the ironing plate and they
are burning there
Clean the iron using the SELF CLEAN
function and the steam shock, or
vacuum the cooled plate delicately
from time to time
27
GB
/ 49
Summary of Contents for VIENTO
Page 50: ......