eta ETA3297, Instructions For Use Manual

Page: 42 / 72

5) Sit comfortably with your tested arm resting on a flat surface. Place your elbow on
a table so that the cuff is at the same level as your heart. Turn your palm upwards.
Sit upright in a chair, and take 5-6 deep breaths. Fig.4
6) Helpful tips for Patients, especially for Patients with Hypertension:
– Rest for 5 minutes before first measuring.
– Wait at least 3 minutes between measurements. This allows your blood circulation
to recover.
– Take the measurement in a silent room.
– The patient must relax as much as possible and do not move and talk during the
measurement procedure.
– The cuff should maintain at the same level as the right atrium of the heart.
– Please sit comfortably. Do not cross your legs and keep your feet flat on the ground.
– Keep your back against the backrest of the chair.
For a meaningful comparison, try to measure under similar conditions. For example, take
daily measurements at approximately the same time, on the same arm, or as directed by
a physician.
D) START THE MEASUREMENT
1) When the monitor is off, press the “ START/STOP ” to turn on the monitor.
Adjust the zero Inflating and measuring Display and save the results
2) Press the “ START/STOP ” to power off, otherwise it will turn off within 1 minute.
Note
At the beginning of the measurement or during the measurement, you can change the
current user by pressing the „USER“ button, under which the result will save.
E) RECALL THE RECORDS
1) When the monitor is off, please press the “ M ” to show the
average value of the latest three records. If the records are
less than three groups, it will display the latest record first.
2) Press the “ M ” or “ S ” to get the record you want.
GB
42 / 66