EN - 78
EN
Problem
Reason
Solutions
02
Robot is stuck
while working
The machine is winding or
obstructing by scattered wire,
curtains, carpet on the ground
Robot will automatically try a
variety of ways to get rid of
trouble. If it cannot, please
manually help
03
When cleaning
is not finished,
robot go back to
charging base for
charging.
Low battery, robot automatically
go back for charging.
To charge the robot.
Wood floors, tiles and other
ground level, robot working
speed and time are different.
The working hours of
robot vary according to the
complexity of the room, the
amount of trash, and the
cleaning mode.
04
Robot does not
clean according
to schedule time.
Robot is not powered on.
Turn on the power switch.
Low battery.
When robot is on standby,
make sure it is charged so
that it has enough power to
work at any time.
Robot is blocked with garbage. Turn off the power and clean
the dust bin, and other parts.
05
Remote control
is not working
(Effective control
range is 5
meters).
Low battery of remote control.
Replace with new battery and
install it correctly.
Robot is not powered on/ Low
battery of robot.
Ensure power switch is turned
on and robot has enough
power.
Remote control infrared
mission or robot receiver
get dirty, unable to launch or
receive signals.
Clean the remote control
infrared emission or robot
receiver with cotton cloth.
There is signal interference
near the robot that produces
infrared rays.
Avoid using the remote
control near other infrared
devices.
8. TECHNICAL SPECIFICATIONS
1
Rated Voltage
14.4 V
2
Battery
Rechargeable battery DC 14.4 V; 2600 mAh,
Li-Ion (the charge time is 5 hours)
3
Working Hours
about 90-120 mins
4
Specification
330 x 78 mm (including the wheel height)
5
Weight
4.6 kg (2,55 only the unit of cleaner)
6
Battery Capacity
2400 mAh
7
Dustbin Capacity
600 ml