EN - 76
EN
Use dry cloth to clean both charging pin on the bottom of robot and on the charging
base.
* Please take out the batteries if stop using for a long time.
5.5. Replace / remove the battery
To replace or remove the battery, unscrew the 4 screws of battery lid
A6
. Disconnect the
connector and remove or change the battery. Place the battery lid and screw all screws
back into place.
7. TROUBLESHOOTING
When the robot has problems, the display panel will show different error code and
send beep sound of varying lengths. Please refer to the following table for problems
and reasons.
Reason
Display
Panel
Prompt
Tone
Solutions
01
Left wheel
abnormal
E11
1
Check left wheel
02
Right wheel
abnormal
E12
1
Check right wheel
03
Left brush
abnormal
E13
1
Check left brush
04
Right brush
abnormal
E14
1
Check right brush
05
Main brush
abnormal
E15
1
Check main brush
06
The robot is not
on the floor
E21
2
Move robot to open place,
and restart it.