WARNING
–
During ironing the thermostat will cycle, which is accompanied by characteristic
sound (clicking). This is normal situation and does not form the reason for warranty
claim related to the appliance.
–
To set the temperatures, you just need to turn the thermostat regulation wheel (to the
right / left) within the given range. Forcible rotation could lead to damaging the
regulation wheel.
Steam ironing
Hold the iron in your hand, turn the steaming regulator
A4
to the position
0
(Fig. 5) and slide
the cover
A3
to open the filling container lid. Pour in water to the container
A9
(Fig. 4) with
the enclosed cup
C
and close the filling hole lid in the opposite direction. Keep the position
of the iron for pouring in water. Put the iron to the rest position (Fig. 7) and set the regulation
wheel
A8
to the marked area for steaming (Fig. 2 - ). Plug the power cord
B4
to a socket.
When the control light
A7
goes off, move the steaming regulator
A4
to the right towards
.
Place the iron to the rest position, automatic creation of steam will stop (more steam may be
going out for a short time).
Warning
–
Setting to pressure steam ironing os recommended only if the regulation wheel
A8
is set
to temperature setting •••.
– Be extra careful to avoid accidental pushing of the
SELF CLEAN
button.
– At pla
ces with hard water we recommend diluting it with distilled water. You will get the
information about water hardness at the water-management authorities, or at the local sanitary
station. For water hardness
> 15 °N
we recommend filling the iron in the following ratio:
Water hardness
Ratio of tap water : distilled water
medium
2 : 1
hard
1 : 1
very hard
1 : 2
Sprinkling appliance (additional spray)
It is used for moistening fabrics and it is effective in ironing extremely creased fabrics. It is
activated by repeated pressing of additional spray button
A5
. We do not recommend applying
additional spray for fine fabrics (e.g.
silk and synthetic
) as the used water may stain the fabric.
Intensive steaming (steam shock)
Use only if the steam ironing is insufficient. In this case press intensive steaming button
A6
several times (Fig. 6A). Thus you will get additional steam except for the steam created by
standard steaming.
Warning
When you press intensive steaming button
A6
several times, water may drip from the ironing
plate due to excess water in the steam chamber. Do not consider this as faulty operation.
22
GB
/ 47