eta Esmira, User Manual

Page: 27 / 52

Problem Cause Solution
Sprinkling
equipment
(additional spray)
does not sprinkle
water
There is no water in the container Pour water into the container
The water system is aerated
Tighten finger on the additional spray
jet hole and at the same time press the
sprinkling device button several times
Flakes and other
impurities are
peeled off the
ironing plate
Contrary to recommendation
undiluted water is used with
excessive hardness >15 °N
Use water diluted with distilled water
Clean the iron using the SELF CLEAN
function and steam shock
Water is dripping
from the ironing
plate
The lid of the pouring hole of the
container is not closed properly
Close the pouring hole lid
The steam shock function was
used when temperature below
ooo was set
Use the regulation wheel to set
a temperature ••• or MAX
The SELF CLEAN button was
pressed during ironing
Do not use the SELF CLEAN function
After finishing ironing, the iron was
put into the horizontal position and
the steaming regulator is not in
position
Move the steaming regulator to
position, empty the container and put
the iron into the rest position
Brown liquid is
pouring out of the
ironing plate
Improper chemical agents were
used for removing scale
Do not add any chemical agents into
the water container for removing scale
You use one of the types of water
that we do not recommend
Use only common clean drinking water
for filling in the container, or water
diluted with distilled water
Fibers from linen got into the
holes in the ironing plate and they
are burning there
Clean the iron using the SELF CLEAN
function and the steam shock, or
vacuum the cooled plate delicately
from time to time
The ironing plate
is dirty or it has
brownish colour
High temperature is set Use the regulation wheel to set
a temperature, by the control that
corresponds to the ironed material so
that the material is not burned on the
ironing plate
Laundry is not sufficiently rinsed
and it contains residues of
washing powder, softener or
starch
Clean the ironing plate (see
Maintenance).
Rinse the laundry properly.
The ironing
plate surface is
scratched
The plate was in contact with
sharp and hard objects while
ironing
During ironing, avoid contact with
metal objects containing sharp edges
and do not put the iron on a metal
base with sharp edges and protrusions
27
GB
/ 46