eta Esmira, User Manual

Page: 23 / 52

– Do not put the power cord on hot surfaces, do not let it hang over the edge of a table
or a work top. When brushed against or pulled (e.g. by children), the cord may cause the
appliance to tilt over or fall down and cause serious injury!
– Check the power cord regularly.
– If you need to use an extension cord, it has to be undamaged and in compliance with
the applicable standards.
– Use this appliance only for the purpose for which it was designed as specified in this
user‘s manual. Never use the appliance for any other purpose.
– CAUTION: Do not use the appliance with a device sensitive to temperature, program,
time switch or any other device that turns the appliance on automatically, as there is
a risk of fire, if the appliance is covered or not placed properly.
– WARNING: There is a risk of injury when the appliance is not used correctly
(not in accordance with the manual).
– All texts in foreign languages and pictures shown on the packaging or the product itself,
are translated and explained at the end of this language mutation.
– The manufacturer is not responsible for damage caused by improper use of the appliance
(e. g. burns, fire, clothes damage, or scratches and staining of the ironing plate ) and
the guarantee may not be applicable, if the safety warnings above are not followed.
II. DESCRIPTION OF THE APPLIANCE (Fig. 1)
A – ironing plate H – thermostat regulation wheel
B – additional spray jet I – water container
C – filling hole lid J – SELF CLEAN button
D – steaming regulator K – rest board
E – additional spray button L – space for power cord wind-up
F – steam shock button M – power cord
G – control light N – handle
O – filling cup
III. INSTRUCTIONS FOR USE
Remove all the packing material and take out the iron with the accessories. Remove any
labels, protective foils or covers from the ironing plate before the first use. Put the iron on
a flat, stable, smooth, clean and heat resistant work surface, out of reach of children and
incapacitated people (see par. I. SAFETY WARNING ). Make sure that the power cord is not
damaged and that it does not lead any sharp or hot surfaces. The electric socket must be
easily accessible so that the iron can be easily disconnected from power supply if danger
appears. At first switch the iron ON to maximum temperature and let the iron at least 10
minutes running without water. The iron may produce slight smoke, which is cased by
burning of used lubricants and seals in steam chamber. This is normal situation and does
not form the reason for warranty claim. During first filling of the tank with operating water
it is recommended to release the steam from whole tank outside the ironed fabric.
Ironing temperatures
– Sort laundry and iron according to the instructions for treatment (e.g. manufacturer’s
recommendation - the label on clothes ). If the instruction is missing and you know the
material of the clothes, follow the table on picture 3. The table applies to basic materials
only, not to possible decorations, material treatment, etc.
23
GB
/ 46