eta ePE-K 140 Installation Manual Download Page 41

Page: 41 / 84

Installation

Mount flue gas connection

The pellet module may not be lifted on the pellet
nozzles as they would be damaged in the

process.

Fig. 9-3: Do not lift on the pellet nozzles

An optional sound-insulation set is available

An optional sound-insulation set is available for
the boiler. If you use this, insert the sound-

insulation strips longitudinally under the boiler's base
frame and also under the stoker's levelling screws.

9.2

Mount flue gas connection

Mounting the flue gas connection

Remove the cover from the top of the boiler.

Fig. 9-4: Cover

Check the flue gas connection seal for damage. Attach
the flue gas connection to the boiler with the nuts.
Tighten the nuts alternately and evenly.

Fig. 9-5: Flue gas connection

Mount the flue gas temperature sensor and secure it
with the screw. Only hand-tighten the screws so as not
to damage the temperature sensor.

Fig. 9-6: Flue gas temperature sensor

Fig. 9-7: Screw

Summary of Contents for ePE-K 140





















































































Search results

Summary of Contents for ePE-K 140

Reviews:

Brands by name

Popular brands

eta ePE-K 140, Installation Manual

Search results

Summary of Contents for ePE-K 140

Reviews:

Brands by name

Popular brands