PREPARATION OF CAPPUCCINO AND LATTÉ MACCHIATO
You can prepare cappuccino and latte macchiato using the pre-set automatic programs
(buttons
B6
and
B7
). It is also possible to use the method of preparation using a separate
milk frothing function (button
B5
).
Note
You can use the
E4
rotary knob to set the ratio between the amount of hot milk and milk
foam:
– If you want more milk foam, turn the
E4
knob to the right.
– If you want more hot milk, turn the
E4
knob to the left.
Using pre-set automatic programs:
1.
Switch on the coffee machine by pressing button
B1
and wait for it to warm up.
2.
Fill the
D
container with water and the
E
container with milk.
3.
Fill the stainless-steel bowl (
C1
/
C2
) with ground coffee to the brim with a measuring
cup
G
. Smother the coffee properly with the stamper (back of the measuring cup
G
)
intended for this purpose.
4.
Place the lever
C
on the coffee machine as shown in Fig. 3.
5.
Press the
B6
button (final beverage volume will be approx. 137 ml) or
B7
button (final
beverage volume will be approx. 273 ml) The indicator light of the relevant button will
flash during preparation.
6.
Wait for the beverage preparation to complete (an acoustic signal sounds).
Preparation of Cappuccino and Latté Macchiato using a separate milk frothing
function:
1.
Switch on the coffee machine by pressing button
B1
and wait for it to warm up.
2.
Fill the
D
container with water and the
E
container with milk.
3.
First, prepare the coffee using the classic method (see paragraph
ESPRESSO
PREPARATION
).
4.
Then press the
B5
button. The indicator light of the
B5
button will flash during
preparation.
5.
Wait for the milk to froth (an acoustic signal sounds).
V. INDIVIDUAL COFFEE MACHINE SETTINGS
INDIVIDUAL SETTING - ESPRESSO
The amount of coffee can be adjusted for both one cup (32-48 ml - button
B2
) and two
cups (62-78 ml - button
B3
). The procedure is as follows:
1.
Switch on the coffee machine by pressing button
B1
and wait for it to warm up.
2.
Fill the container
D
with water.
3.
Then press and hold the
B2
/
B3
button (an acoustic signal sounds) until the required
amount of coffee flows out. When the required amount of coffee has flowed, release the
button pressed (an acoustic signal sounds).
4.
The setting will be saved in the coffee machine memory and will remain stored even
after the coffee machine is switched off and unplugged. network.
Remark
If you hold the
B2
/
B3
button too short, your settings will not be saved.
GB
26 / 55
