51/91
EN
Installation
IMPORTANT!
For electrical connection carefully follow the instructions given
in specific paragraphs.
•
Unpack the appliance and check if there are damages on it.
Do not connect the appliance if it is damaged. Report possible
damages immediately to the place you bought it. In that case
retain packing.
•
It is advisable to wait at least four hours before connecting the
appliance to allow the oil to flow back in the compressor.
•
Adequate air circulation should be around the appliance, lacking
this leads to overheating. To achieve sufficient ventilation follow
the instructions relevant to installation.
•
Wherever possible the spacers of the product should be against
a wall to avoid touching or catching warm parts (compressor, con-
denser) to prevent possible burn.
•
The appliance must not be located close to radiators or cookers.
•
Make sure that the mains plug is accessible after the installation
of the appliance.
Service
•
Any electrical work required to do the servicing of the appliance
should be carried out
by a qualified electrician or competent person.
•
This product must be serviced by an authorized Service Center,
and only genuine spare parts must be used.
Energysaving
•
Don’t put hot food in the appliance;
•
Don’t pack food close together as this prevents air circulating;
•
Make sure food don’t touch the back of the compartment(s);
•
If electricity goes off, don’t open the door(s);
•
Don’t open the door(s) frequently;
•
Don’t keep the door(s) open for too long time;
•
Don’t set the thermostat on exceeding cold temperatures;
•
All drawers, shelves and door compartments should be placed in
their position for the lowest possible energy consumption.
Summary of Contents for 139090010E
Page 92: ......
