Control:
1) Switching to standby mode
-
Connect driver unit
A
to the mains.
-
Put the container
C
on the arrest pins.
-
Once the container is put on, the mixer will automatically switch to standby mode.
You will hear a sound signal and the display and button backlight will come on.
-
Then the individual functions may be set.
Note
Unless you press a button within approx. 20 seconds, the appliance will switch to the
energy-saving mode. The display will go out and only the B10 switch button will be flashing.
2) Manual speed setting and time setting
-
Press
B5
button to set the speed. You will hear a sound signal and the
B5
button
backlight will start flashing. Set the desired speed by
B2
and
B3
buttons. 9 speed
levels are available.
-
Press
B4
button to set the processing time. You will hear a sound signal and the
B4
button backlight will start flashing. Set the desired processing time by
B2
and
B3
buttons. The processing time may be set in the interval from 5 seconds to 6 minutes.
-
Now turn on the mixer by
B10
button.
3) Use of pre-set programmes
-
Select the required programme using the
B9
button. Each time you press a button,
you will hear a sound signal and the indicator of the relevant selected programme will
start flashing.
-
The “SMOOTHIE” and “QUICK CLEAN” programmes have their own special buttons
(
B6
,
B8
).
-
The selected processing programme may be started by pressing
B10
button.
-
The individual phases of the pre-set programmes are indicated on
B1
display.
Programme
name
Total time
(sec.)
Use
SMOOTHIE
60
Preparing fruit and vegetable beverages (smoothies)
MILK
180
Preparing milk cocktails
NUTS
120
Chopping nuts and making butters
ICE
80
Chopping ice
PUREE
90
Preparing fruit purees and vegetable purees
QUICK_CLEAN
40
Mixer maintenance and cleaning
Notes
–
The manually set and pre-set programmes may be terminated at any time by pressing
B10
button.
4) Using PULSE button (
B7
)
-
By pressing and holding
B7
button, the maximum rotation speed can be turned on.
-
Once released, it stops the speed.
28
GB
/ 51