eta 0064 90000, Instructions For Use Manual

Page: 12 / 32

12
GB
/ 26
– Do not insert or take the plug out of a socket with wet hands and do not pull the power cord!
– This appliance is not intended for outdoor use.
– The appliance must not be used in damp or wet environment and in any environment with
the danger of fire or explosion ( spaces where chemicals, fuels, oils, gases, paints and
other flammable or volatile materials are stored ).
– Always use the grinder only in places where there is no danger that it could overturn.
– Be careful to use only good quality coffee beans and check whether they are free of any
articles which could damage the grinder. articles which could damage the grinder.
– – The grinder filler capacity is 50 grams of coffee. The grinder filler capacity is 50 grams of coffee.
– – The maximum time of processing is 30 seconds. Then wait for 10 minutes, which is The maximum time of processing is 30 seconds. Then wait for 10 minutes, which is
necessary for the drive unit to cool down. necessary for the drive unit to cool down.
– – After use, unplug the grinder from the mains. After use, unplug the grinder from the mains.
– – To avoid danger in case of damage to the flex, a damaged flex must be repaired or To avoid danger in case of damage to the flex, a damaged flex must be repaired or
replaced by the manufacturer, its service engineer or a similarly trained person. replaced by the manufacturer, its service engineer or a similarly trained person.
– – Do not wind the power cord around the appliance; this will extend life of the power cord. Do not wind the power cord around the appliance; this will extend life of the power cord.
– – The power cord must not be damaged with sharp or hot objects, open fire; it must not be The power cord must not be damaged with sharp or hot objects, open fire; it must not be
sunk into water or bent over sharp edges. sunk into water or bent over sharp edges. Never put it on hot surfaces or do not let it hang
over the edge of a table or work tables. Hitting, stumbling over or pulling the power cord
e.g. by children can result in tilting over or drawing the appliance down and serious injury!
– The producer does not undertake any responsibility for damage caused by improper use
of the appliance (e.g. food deterioration, injury caused, fire, etc.) and its guarantee does
not cover the appliance in the case of failure to comply with the safety warnings above.
II. DESCRIPTION OF THE PRODUKT (Fig. 1)
A – Grinder
A1 – lid A4 – ON/OFF push-button switch (the motor
A2 – grinding chamber runs only for the time when the switch
A3 – blades A5 – safety lock
A6 – power cord!
III. OPERATING INSTRUCTIONS
Plug power supply fork to the electric power. Disassembling the lid A1 . Spill some coffee
beans in the grinding chamber A2 (Figure 1) and close the lid so that turn the lid clockwise
(you will hear a click and at the same time, safety lock is unlocked). Pay special attention
to this operation. The grinder is switched ON and OFF by the ON/OFF switch A4 . When
processing coffee, apply operation pulses according to the required graininess of coffee.
After the grinding has finished, remove the lid. Remove the lid and empty the coffee in
a suitable jar. To install the lid in the grinder follow the above procedure in the reverse order.
Wind the cord A6 in the bottom of the grinder.
Notice
–
Ensure good quality of coffee. We recommend that you check
coffees for presence of any foreign objects before milling (e.g.
fragments of blades) which could damage the product (e.g. abrade
the grinding discs). Possible complaints within the warranty
period as a result of these impurities will not be taken into account.