background image

 

– 8 – 

ETAsys.com

Specifications are subject to change without notice.

1601 Jack McKay Blvd. • Ennis, Texas 75119  U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

LIMITED WARRANTY 

All products manufactured by ETA Systems are warranted to the original dealer/installer, industrial or commercial purchaser to be 
free from defects in material and workmanship and to be in compliance with our published specifications, if any. This warranty 
shall extend from the date of purchase for a period of one year. Additionally, fuses and lamps carry no warranty. ETA Systems will 
solely at its discretion, replace at no charge or repair free of charge defective parts or products when the product has been applied 
and used in accordance with our published operation and installation instructions. We will not be responsible for defects caused by 
improper storage, misuse (including failure to provide reasonable and necessary maintenance), accident, abnormal atmospheres, water 
immersion, lightning discharge, or malfunctions when products have been modified or operated in excess of rated power, altered, 
serviced or installed in other than a workmanlike manner. The original sales invoice should be retained as evidence of purchase under 
the terms of this warranty. All warranty returns must comply with our returns policy set forth below. When products returned to ETA 
Systems do not qualify for repair or replacement under our warranty, repairs may be performed at prevailing costs for material and labor 
unless there is included with the returned product(s) a written request for an estimate of repair costs before any non-warranty work is 
performed. In the event of replacement or upon completion of repairs, return shipment will be made with the transportation charges 
collect.

 

EXCEPT TO THE EXTENT THAT APPLICABLE LAW PREVENTS THE LIMITATION OF CONSEQUENTIAL DAMAGES FOR PERSONAL 
INJURY, ETA SYSTEMS SHALL NOT BE LIABLE IN TORT OR CONTRACT FOR ANY DIRECT, CONSEQUENTIAL OR INCIDENTAL 
LOSS OR DAMAGE ARISING OUT OF THE INSTALLATION, USE OR INABILITY TO USE THE PRODUCTS. THE ABOVE WARRANTY IS 
IN LIEU OF ALL OTHER WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 
A PARTICULAR PURPOSE.

 
ETA Systems does not assume, nor does it authorize any other person to assume or extend on its behalf, any other warranty, 
obligation, or liability. This warranty gives you specific legal rights and you may have other rights which vary from state to state.

 

SERVICE

Should your ETA-S15L require service, please contact the 

 

ETA Systems warranty department at  

1-877-689-8055, ext. 277 to obtain an RA number.

ETA Systems Tech Support can be reached at 1-800-321-6699.

Visit our web site at www.ETAsys.com to see other ETA Systems products.

©2009 ETA Systems  All rights reserved.   ETA003562 RevA 05/09

ETA-S15L 

Power Conditioner & Distribution Unit

Summary of Contents for ETA-S15L









Reviews: