background image

 

– 3 – 

ETAsys.com

Specifications are subject to change without notice.

1601 Jack McKay Blvd. • Ennis, Texas 75119  U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

SAFETY INSTRUCTIONS

1.   Read these instructions.

2.   Keep these instructions.

3.   Heed all warnings.

4.   Follow all instructions.

5.   Do not use this device near water.

6.   Clean only with dry cloth.

7.   Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.   Do not install near any heat sources such as radiators, heat registers, stoves, or other device (including amplifiers) that produce 

heat. 

9.   Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the 

other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your 
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 

10.   Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they 

exit from the device.

11.   Only use attachments/accessories specified by the manufacturer.

12.   Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the device. When a cart is used 

use caution when moving the cart/device combination to avoid injury from tip-over.  

13.   Unplug this device during lightning storms or when unused for long periods of time. 

14.   Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as 

power-supply cord or plug is damaged, liquid has been spilled, objects have fallen into the device, the device has been exposed to 
rain or moisture, does not operate normally, or has been dropped. 

15. 

 WARNING:

 To reduce the risk of fire or electric shock, this device should not be exposed to rain or moisture and objects filled 

with liquids, such as a vase, should not be placed on this device. 

16.   To completely disconnect this equipment from the mains, disconnect the power supply cord plug from the receptacle. 

17.   The mains plug of the power supply cord shall remain readily operable. 

PA Amplifier 

Model AA35 

Output Rated 35W 

Designed and Engineered  

by Atlas Sound 

Made In CHINA 

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

ATTENTION

 RISQUE DE DECHARGE ELECTRIQUE

-NE PAS OUVRIR.

WARNING

 

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK

 DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

´

The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated “dangerous voltage “ within the 
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons. 

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the 
literature accompanying the product.  

ETA-C15D 

Power Conditioner

Summary of Contents for ETA-C15D













Reviews: