These tabs are spaced evenly by tier (
7
per each leg.) These will allow for the cross-beams to
interlock into place. Once one end is locked, slide the opposite end down the channel to also
lock that end into place. Doing this step correctly will allow the cross-beam to sit flush
between the legs. To ensure that they are connected properly, gently push the top of each end
downward, making sure that it doesn’t budge. The edges of the cross
-beam with the slot,
should be facing towards the outside of the rack on both the front and back sides.
Summary of Contents for ETD-SB-HL3205
Page 1: ...ETD SB HL3205 ...
Page 22: ......
