Identifying Legs Prior to Assembly
Start with the legs by looking at how they are numbered on the bottom ends. Labels on legs
will be numbered
(1)
through
(4)
. The end with the number will serve as the bottom of the
rack. Legs that are numbered
(1)
and
(2)
should act as the front legs, and legs
(3)
and
(4)
will
serve as the back legs. Legs on left side should be paired as
(1 & 4
) and the right side as
(2 &
3).
Begin assembly by laying two of the leg pieces, either legs
(1 & 4)
or
(2 & 3)
parallel to each
other on the floor. Make sure to lay the leg pieces with the inner-channel (inside) facing down.
The legs that are laid down, should have
two threaded insert holes that are close together
.
The second leg across should have two threaded insert holes that are spread further apart.
The edges on both legs that have the threaded insert holes, should be closest to center
space between the two legs.
Summary of Contents for ETD-SB-HL3205
Page 1: ...ETD SB HL3205 ...
Page 22: ......
