35
GB
11 • MOBIL-PDi/User CHANNEL CONTROL
Setting parameters are valid for a temporary period only
1. The detector starts to dim the lighting; you can
determine the dim direction (light to dark or dark to light)
by repeatedly activating the "Dim channel 1" function
2. The dim function is interrupted and stored in "channel 1"
3. Switching "channel 1" ON/OFF
4. The detector starts to dim the lighting; you can
determine the dim direction (light to dark or dark to light)
by repeatedly activating the "Dim channel 2" function
5. The dim function is interrupted and stored in "channel 2"
6. Switching "channel 2" ON/OFF
7. 4-hour mode is enabled/disabled
Please note: You cannot make further parameter changes until
4-hour mode has been disabled.
8. Switching "channel 3" ON/OFF
Please note: "Channel 3 4 h" mode must be disabled.
9. 4-hour mode is enabled/disabled on all channels
Please note: You cannot make further parameter changes until
4-hour mode has been disabled.
10. Switching all channels ON/OFF.
Please note: "All 4 h" mode must be disabled.
1
3
8
5
2
4
7
9
6
10
PDi/User
Remote control
Channel control
Scenes
Reset
System
Bat ok
LS
User
Channel control
Dim channel 1
Channel 1 OK
Channel 1 ON/OFF
Dim channel 2
Channel 2 OK
Channel 2 ON/OFF
Bat ok
LS
User
Channel control
Channel 2 ON/OFF
Channel 3 4h
Channel 3 ON/OFF
All 4 h
All ON/OFF
Bat ok
LS
User
Summary of Contents for Mobil-PDi/DALI Series
Page 81: ...81...
