25
GB
1
1
3
3
5
5
7
8
2
2
4
4
6
When you start up the Mobil-PDi/MDi-Universal, the default programme appears on the display: Mobil-PDi/MDi.
Then, the most recently selected remote control is indicated.
6 • OVERVIEW OF GENERAL FUNCTIONS
1. Default programme of the currently selected remote control
(Mobil-PDi/MDi)
2. Remote control selection
3. Direct control of detectors without programming mode
4. Read mode for setting parameters
5. Information on Mobil-PDi/MDi-Universal
6. Currently selected remote control
7. Battery status ("ok"/"low")
8. Light sensor status
1. Remote control can be switched off manually, switches off
automatically if no button is pressed for approx. 60 sec
2. When an SD card is inserted, the various versions are
displayed in the respective language. If no SD card is inserted,
the following message appears: "Searching for SD card…" /
"no SD or file found"
3. Switching the light sensor ON/OFF
4. Adjusting the display brightness
5. Latest software version no.
PDi/MDi
Remote control
Functions
Channel 1
Channel 2
System
Bat ok
LS
MDi
System
Switch off remote cont.
Software
Light sensor
Display brightness
Version no.
Bat ok
LS
MDi
Summary of Contents for Mobil-PDi/DALI Series
Page 81: ...81...
