60
GB
12 • DUO DALI plus PROGRAMMING
LEVEL 1
PROGRAMMING
LEVEL 2
Operating modes
Differentiating between the channels in fully and semi-
automatic mode.
LEVEL 3
C1/2 fully automatic
The detector automatically switches channels 1 and 2 on
and off.
C1/2 semi-automatic classic
A button must be pressed to switch channels 1 and 2 on.
If the measured light value exceeds the preset threshold
value, the detector will switch to 10% light and wait for a
button to be pressed for 1 minute. If no button is pressed,
the detector will switch off again. The button needs to be
pressed again to switch the channels back on.
C1/2 semi-automatic smart
A button must be pressed to switch channels 1 and 2 on.
If the measured light value exceeds the preset threshold
value, the detector will switch to 10% light and wait for a
button to be pressed for 1 minute. If no button is pressed,
the detector will switch off again. If the measured light
value is below the preset threshold value, the detector
will switch on channels 1 and 2 independently if further
movement or presence is detected.
LEVEL 1
PROGRAMMING
LEVEL 2
Operating modes
Differentiating between the channels in fully and semi-
automatic mode.
LEVEL 3
C3 fully automatic
The detector automatically switches channel 3 on and off.
C3 semi-automatic
To start channel 3, the connected button needs to be
pressed.
C3 impulse
Channel 3 switches on for 5 sec. and off for 5 sec.
(if movement is detected).
C4 fully automatic
The detector automatically switches channel 4 on and off.
C4 semi-automatic
To start channel 4, the connected button needs to be
pressed.
C4 impulse
Channel 4 switches on for 5 sec. and off for 5 sec.
(if movement is detected).
