background image

7

CONNECTION DESCRIPTION

      IMPORTANT NOTE:

The handbrake signal must be connected to 

BRAKE

. When the handbrake is applied, the 

signal must be connected to ground. According to legal regulations, the device may only 

play videos on the main screen when the handbrake is engaged. The connection cable must 

therefore not be permanently connected to ground. While driving, the screen is switched off 

to avoid accidents caused by carelessness.

GPS antenna (Fakra connector, blue)

DAB antenna (Fakra connector, turquoise)

Vehicle FM antenna (Fakra connector)

E

Camera cable set for rear-view camera (10-pin connector, white)

If you need phantom power for your vehicle antenna, please use the antenna adapter 

(page 4, accessories G) and connect a + 12V power supply, e.g. “AMP CONT.” from 

system cable set A, to the blue cable.

Cable blue: 

+12V connection 

RCA yellow (R-CAM): 

 

Video input for rear view camera

Cable brown (BRAKE):   

Connection for handbrake signal (ground)

Cable pink (CAM-12V):

   

Power supply for cameras

 

 

 

 

(only active in reverse gear)

For connecting cameras, observe the information from page 8 onwards.

D

F

G

Summary of Contents for VN930













Reviews: