ESX VN809 MB-B1, Owner'S Manual

Page: 12 / 28

12
LinkPod
(optional)
Make sure that the iPod™ is properly connected to the device
via the supplied USB cable. This cable allows also the connec-
tion of an iPhone™ to use its built-in audio playback mode.
The battery is charged via the USB port when the device is
switched on. With older iPod ™ models, it may occur, that they
will not be detected, after the device was switched off. Discon-
nect and connect again the iPod ™ in this case.
The user interface is modeled like the user interface of the iPod™. You get access to the iPod™ its contents
and playlists through the lower control panels. By tapping „MENU“ you can make the desired playback settings
such as „Shuffle“ or „Repeat“.
After you have tapped on „Movie“, the file manager will open.
Select then a movie file either on the local hard drive or the
USB stick or the inserted microSD card.
If a movie isn‘t playable, the codec or file format of the file is
not compatible with the device.
Supported video formats: MPEG 1/2/4, AVI, WMV, DivX, H.264
Tap on „Option“ to perform file operations.
Tap double on the file to start playback. Tap on the screen to display the movie control
panel during playback. Pull or push the pro-
gress bar to change the playback position.
Movie
BASIC FUNCTIONS