Eswood UT-20 Series, Equipment Manual

Page: 9 / 20

UT-20 UTENSIL WASHER MODELS UT20H & UT20P – JUNE 2011 9
W
ASHING OPERATION
UT-20 UTENSIL WASHER
(INCLUDES UT20H & UT20P MODELS)
6
1.
Check that the Overflow Tube is firmly in the tank waste plug.
Place Strainer Screens and Strainer Basket are in place.
2.
With the door closed, turn the rotary switch to “FILL” position
and then press the green START button, the cycle lights will
illuminate whilst the machine is filling, then open door and
check that the water is close to overflow level.
3.
Select “Short”, “Med” or “Long” cycle, dependent on the degree
of soil
Wait till the temperature displayed by thermometers
reach that indicated above each, as machine will not
operate at low temp.
4.
If no automatic detergent dispensing equipment is fitted, add ½
a cup of non-foaming commercial detergent into the wash tank,
place the soiled items into the Basket provided, slide Basket
into machine. Close door and press the green START button,
the cycle lights will illuminate till the Cycle is complete.
5.
Open Door slide Basket out onto door and remove washed
items, To wash more items repeat step 4.
Except add one
level tea spoon of detergent if no auto Dispenser fitted.
Note: hand feeding of detergent is not recommended for
commercial washing machines and suggests an automatic
detergent dispenser be installed. Check with your detergent
supplier.