Eswood IW-3N, Equipment Manual, Page: 8 / 17

ESWOOD OPERATING MANUAL IW-3N June 2011
8
W
ASHING OPERATION
6
1. Check the level of detergent and replace when necessary. Dilute the
detergent according to the manufacturers’ recommendations, if required
2.
Turn the power on and the red “Power On” pilot light will illuminate. It will
take about 10-15 minutes for initial heating of water in the break tank.
3.
Open the door, slide the rack in and close the door & select the cycle, Hot
only or Hot & Cold.
4.
With the “READY” pilot light on, push the Start button. While the machine is
running the amber “CYCLE” light is illuminated.(see Figure 2.)
5.
Check that the drain outlet is free from debris such as paper, toothpicks and
sliced fruit.
FIGURE 2.
CYCLE
SELECTOR
GREEN
“STAR
T
AMBER
RED
GREEN
RED