Eswood IW-3N, Equipment Manual, Page: 10 / 17

ESWOOD OPERATING MANUAL IW-3N June 2011
10
T
ROUBLE SHOOTING
8
Problem Possible cause and remedy
(a) Check machine is plugged in and
turned on.
When machine is
turned on, red power (b) Check fuses(15 Amp) are okay.
light does not
illuminate c) Power light may be burnt out. If so,
replace it (this will not stop machine from
operating though).
Machine will not start
(a) Check operation of the door switch.
(b) Ensure that the water temperature
has reached 82
O
C - standard Ready
light-
(c) Check faulty element or low-cut-out
thermostat.
Poor water pressure
(a) Check if hot water isolating valve is
during wash/rinse fully open, and check for obstructions in
the hot water supply line.(line strainer)
(b) Check for obstruction in the hot water
supply solenoid valve and clean if
necessary.
Check diaphragm and
replace if faulty.
Poor wash
(a) Check that detergent feeder to
machine is operating correctly, and that
detergent is not empty.
(b) Check for foreign matter in wash arm
jets. Clean if necessary.
(c) Check that glasses to be washed are
correctly placed in racks.
(d) Check temperature of break tank. If
incorrect check thermostat setting and
heating element.