PowerPack
The as standard pre-installed »PowerPack« energy sto-
rage ensures that the lighting functions are maintained,
also during a longer-lasting current interruption (e.g. in
front of red signals). Wire connections are not necessary,
the functions works fully automatically.
Taillight
The taillight can be used on both ends of the lighting
board. Please consider the correct polaritay when
soldering the wires.
Interior Lighting Sets
Digital operation
If you wish to switch the circuit board digitally you need
the LokPilot Fx V3.0 decoder, ESU Ordering no. 52621.
The LokPilot decoder is a multi protocol decoder and
can be used for DCC, Motorola® or analogue AC
operation.
You only need to remove the dummy connector from
the circuit board and plug on the decoder instead. Please
make sure that the polarity is correct and the decoder
is seated correctly!
Without having to change the settings after the in-
stallation the lighting board is now switchable with
F1. The taillight is switchable via the lighting key F0
(direction-dependent).
