background image

4

TRANSMITTER MAIN MENU

INPUT KEY FUNCTION

(4)

Move the stick forward or backward to increase or decrease
speed. Move the stick left or right to make the quadcopter roll
left or right to initiate a banked turn.

(8)

Move the stick forward or backward to make the quadcopter
nose point up or down. Move the stick left or right to make the
quadcopter yaw left or right.

9

Aileron trim adjusts for left and right drift.

6

Elevator trim adjusts for forward and backward drift.

4

Rudder trim adjusts for drift of left and right rotation or yaw.

2

Throttle trim normally left at neutral. The lower trim turns
 LEDs on and off.

8

Push to ON to turn on the transmitter. Push to OFF to turn off.

7

Move the stick forward or backward to make the quadcopter
move forward or backward. Move the stick left or right to make
the quadcopter drift sideways left or right.

3

5

MODE/ CONTROL

MODE 1

THROTTLE /AILERON STICK 

MODE 1

ELEVATOR/RUDDER STICK 

AILERON TRIM 

ELEVATOR TRIM 

RUDDER TRIM 

THROTTLE TRIM 

POWER SWITCH 

MODE 2

ELEVATOR/AILERON STICK 

MODE 2

THROTTLE/RUDDER STICK 

RECORDING

Press the Recording button  for 1 second to start or stop

Move the stick forward or backward to make the quadcopter 
ascend or descend. Move the stick left or right to rotate the
quadcopter’s fuselage left or right.

Summary of Contents for Proto-X FPV













Reviews: