background image

2

Thank you for purchasing the Estes Proto-X FPV (First Person Video) HD Quadcopter. 
We want the time you spend with your new RC product to be fun and successful so 
please fully read the manual. If for any reason you think this RC model is not for you, 
return it to your place of purchase immediately. Your dealer cannot accept returns on 
any model after final assembly or after your product has been operated.

SAFETY PRECAUTIONS

Improper use of this product could result in serious injury. Be aware of your 
personal safety and safety of others as you operate your model. We recommend 
beginners learn to fly with the help of an experienced pilot.

  Adult supervision required.

  Changes or modifications to this product not expressly approved by the 

party responsible for compliance may void the user’s authority to operate 
the equipment.

  Do not alter or modify the model, as doing so may result in an unsafe or un-

flyable model.

  Do not touch the spinning blades or fly over another person’s head.

  Keep your face and body as well as all spectators away from the rotors 

whenever the battery is connected.

  Maintain a safe pilot-to-helicopter distance while flying.

  Stay clear of buildings, trees and power lines. AVOID flying in or near crowded 

areas. DO NOT fly close to people, children or pets.

  You must check the operation of the model before every flight to ensure that 

it is structurally sound.

  Your Proto-X FPV should not be considered a toy, but rather a small, working 

model. If not operated correctly, the model could possibly cause injury to you 
or spectators and damage to property.

  The Proto-X FPV has parts that rotate and move at high speeds which in 

itself poses a certain degree of danger. Please be mindful of this as you 
operate your model.

  Choose a wide open space with minimal obstructions and do not operate your 

model near buildings or crowds of people, high voltage power lines or trees.

  Improper use may cause damage to people or property.

  Your Proto-X FPV is powered by a Lithium-Polymer (LiPo) battery. To avoid 

risk of fire damage use ONLY the provided charger and avoid charging your 
model on a combustible surface.

  If you do not plan on flying your Proto-X FPV for a week or more, store the 

battery approximately 50% charged (one and one half hour charge time from 
a fully depleted battery) to maintain best battery performance.

  Never get your Proto-X FPV wet or operate in the rain.

90-DAY LIMITED WARRANTY

PLEASE DO NOT RETURN YOUR PRODUCT TO THE STORE

Estes will repair or replace factory defects for 90 days from the date of purchase. 
This warranty specifically does not cover crash damage, misuse or abuse. To 
make a warranty claim, please contact our product support team at 

1-217-398-

8970

 

option 6

 

or e-mail us at 

[email protected]

If requested by Product Support, please send your defective product to:

Hobby Services

3002 N Apollo Dr., Suite #1

Champaign, IL 61822

Please include a note about the problem, your contact information, and a copy 
of the receipt.

This warranty applies only if the product is operated in compliance with the 
instructions and warnings provided with each model. Estes assumes no liability 
except for the exclusive remedy or repair of parts as specified above. Estes shall 
not be liable for consequential or incidental damages. Some states do not allow 
the exclusion of consequential or incidental damages so the above exclusion may 
not apply to you. This warranty gives you specific legal rights and you may also 
have other rights which vary from state to state.

FCC STATEMENT AND
INDUSTRY CANADA NOTICE

1. This device complies with Part 15 of the FCC Rules and RSS-210 of Industry 
Canada. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2)  This device must accept any interference received, including interference 

that may cause undesired operation. 

2. Changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate the equipment.

Remark: 

This device is in accordance with the digital device grade B limitation and 

the 15th regulation of FCC. This limitation requires reasonable anti-interference 
protection around the residence. The device can transmit radio waves during 
use and can interrupt the mobile communication without proper installment. 
Interruption will occur for special devices. If the device does interrupt the radio or 
television, please turn the device off and then turn it on to adjust. Below are some 
resolutions for your reference:

  

Move the receiving antenna

  

Enlarge the distance between the device and receiver

Summary of Contents for Proto-X FPV













Reviews: