Continuous mode
This mode is recommended for larger areas (for example, arms, legs).
1.
Keep the basic filter on the device and place the magnetic large filter onto the top of
the device.
2.
Place the device at a 90° degree angle against your body, keeping the treatment
window fully covered by your skin. When the skin sensor indicator ‘ ’ appears on the
display, press and hold the flash button whilst moving the device against your skin
around the desired areas you wish hair to be removed. Flashes will continuously emit
through the treatment window as long as the flash button is held down and the skin
sensor indicator ‘ ’ stays on the display.
3.
To stop the flashing, release the flash button and take the device away from your
skin. The skin sensor indicator ‘ ’ should disappear.
Auto mode
This mode is recommended for larger areas (for example, arms, legs).
1.
Keep the basic filter on the device and place the magnetic large filter onto the top of
the device.
2.
Press and hold the flash button for 3 seconds to activate auto mode. The display will
then show the auto mode indicator ‘ ’. Release the flash button.
3.
Place the device at a 90° degree angle against your body, keeping the treatment
window fully covered by your skin. When the skin sensor indicator ‘ ’ appears on the
display, the device will automatically start flashing through the treatment window.
Move the device against your skin around the area you wish hair to be removed.
4.
Once finished, to stop the flashing, take the device away so the treatment window is
not touching your skin. Alternatively, press and hold the flash button for 3 seconds to
turn off auto mode.
Skin rejuvenation mode
This mode is recommended for the whole body.
1.
Keep the basic filter on the device and place the magnetic large filter onto the top of
the device.
2.
Double press the power button and the display will show ‘ ’, confirming the skin
rejuvenating mode is activated. In this mode the intensity level is pre-set to revive
collagen and rejuvenate skin.
3.
To activate the treatment window and light, continue to follow the steps to either the
manual, continuous, or auto mode.
