![background image](http://html.mh-extra.com/html/finishing-touch/flawless-brows/flawless-brows_quick-start-manual_2289858001.webp)
Installing / Changing Battery
• Remove cap.
• Hold top and bottom of unit and pull apart to reveal
battery compartment [Image 1].
• Place 1 AAA battery (included) into battery
compartment as indicated [Image 2].
• Slide/snap bottom casing back into place.
NOTE: Prior to first use, test unit on small area. If
sensitivity or allergic reactions occur, discontinue use
immediately.
How to Use
• Slide switch to ON position [Image 3]. Light will
turn on.
• Use on clean, dry skin. Pull skin tight and move in
small back and forth motions [Image 4].
NOTE: It is normal for hair removal head to become
warm with use.
For any questions or
comments, visit
www.FLAWLESSBEAUTY.com
IMAGE 6A
IMAGE
6B
(c)
IMAGE 5
(c)
IMAGE 4
IMAGE 2
IMAGE 1
IMAGE 3
ON
For Optimal Results
•
Use on clean and completely dry skin with no cream or
cosmetic residue.
• Pull skin tight and move in small back and forth
motions [Image 4].
• If unit begins to slow down, clean head of hair residue.
• If unit is still running slow, change battery.
• It is normal for skin to appear red immediately after
use due to pressure and friction applied.
Cleaning (Be sure unit is off)
• After each use, clean head with included
brush.
• Twist head counter-clockwise and lift off
[Image 5].
• Gently brush away hair residue on stem (c)
[Image 6A].
• Use brush inside head [Image 6B].
• Place head back on unit and twist
clockwise until it locks back in place.
PLEASE NOTE: The more you use Flawless Brows, the more precise your results will be.
Please allow time for your hair and skin to become accustomed to this new innovative way
to remove hair.