Esteam e1200, Owner'S Manual

Page: 9 / 32

8
6. Internal (inside machine) or 6. See dealer
external solution line damaged
and leaking
TROUBLE SHOOTING (CONTINUED)
PROBLEM CAUSE SOLUTION
5. 1000 PSI Plunger 1. Pressure regulator valve 1. Adjust pressure using
pump runs but has out of adjustment regulator located at the
loss of pressure front of the machine
2. Partial kink in solution hose 2. Remove kink
3. Partial blockage in solution 3. Remove blockage
hose
4. Jet orifice opening on clean- 4. Total jet opening for
ing wand is too large 1000 PSI pump
should be .04
5. Pressure regulator valve 5. See dealer
components wearing out
6. Internal pump components 6. See dealer
wearing out
6. Vacuum operates 1. Recovery tank full 1. Drain recovery tank
but has poor or no
suction 2 Vacuum hose plugged 2. Locate and remove
blockage
3. Wand plugged 3. Locate and remove
blockage
4. Exhaust port blocked 4. Locate and remove
blockage
5. High level float stuck in off 5. Turn vacuum off and tap
position top of float screen cage