18
AUS
AFTER SALES SUPPORT
1300 112 534
tempo.org/support
MODEL: EST-EFLDBIKE1 PRODUCT CODE: 710356 08/2022
Instructions (Cont.)
Electric-assisted mode (pedal assistance)
Pedal assistance is triggered when you pedal forward and it stops when you stop
pedalling. In other words, power assistance happens as long as you pedal. You
do not need to pedal hard, just apply a light force to the pedals continuously to
maintain the current flow.
When you apply one of the brakes, power assistance will stop automatically,
allowing the electric folding bicycle to slow down and stop.
Power assistance will turn itself off when the e-bike has reached the maximum
speed of 25 km/h, in accordance with the current standard.
6 km/h mode
Turn the throttle to provide 6 km/h assistance when pushing (walking along with)
the electric folding bicycle.
Do NOT turn the throttle when riding the bike!
Removing/inserting the battery
To
remove
the battery, turn the battery key to the
UNLOCK
position and pull out
the battery by the handle.
To
insert
the battery in the frame, turn the battery key to the
OFF
position.
IMPORTANT: Check the bicycle before every use!
–
Tighten the handlebars and stem
—the stem must be inserted into the head
tube to at least the minimum insertion line and the clamp nut and stem bolt
tightened securely.
– Check the saddle
—the minimum insertion line must be inside the frame, the
seat clamp securely tightened and the seat at the proper height.
– Check the tyres
—they must be inflated by hand to the appropriate pressure
270–440 kPa (39–64 psi). The tyres should feel very firm, but not hard when
squeezed between your thumb and fingers.
– Check the brakes
—test them before you ride. Replace the brake pad when
any part of the brake pad wear groove is not visible.
– Check the chain
—ensure it is correctly routed. Clean and relubricate the
chain when required. Check for "chain stretch" after extensive cycling
WARNING:
Failure to perform these checks could result in serious injury to
yourself and others.
