14
AUS
AFTER SALES SUPPORT
1300 112 534
tempo.org/support
MODEL: EST-EFLDBIKE1 PRODUCT CODE: 710356 08/2022
Assembly (Cont.)
Step 4: Installing the Saddle
The saddle is pre-assembled to the seat post (Fig. 11).
1. Loosen the seat clamp, then insert the seat post into the bicycle frame, making
sure that the minimum insertion mark on the seat post is completely inserted
into the frame and not visible.
2. Tighten the quick release seat post binder bolt securely at the desired height.
Turning the tension adjustment nut clockwise while keeping the cam lever from
rotating increases clamping force. Turning it counterclockwise while keeping
the cam lever from rotating reduces clamping force. Less than half a turn of the
tension adjustment nut can make the difference between safe clamping force
and unsafe clamping force.
3. Adjust the seat angle so that the top of the seat is parallel to the ground and
comfortable for the rider.
4. Retighten the seat clamp nuts securely with an adjustable wrench.
5. Your new electric folding bike is now fully assembled.
IMPORTANT!
• Pay special attention to the insertion warning mark.
• Test the seat to pedal distance by having the rider sit on the seat. When the
rider's leg is slightly bent, the ball of the foot should rest on the pedal when it
is in its lowest position and the feet of a seated rider can reach the ground. If
it does not, adjust the seat height as necessary.
• Check for tightness by attempting to twist the seat. If the seat is loose, be
sure to tighten the clamp nut and binder bolt nut securely.
Fig. 11
