Cleaning, Maintenance and Repair
Cleaning
The scope can be cleaned with distilled water or Isopropanol (70%). The cleaning fluid should
be applied with a wet wipe or by direct wetting.
essent
im
recommends the following procedure for cleaning:
1.
Turn off the scope.
2.
Insert the anti-dust plugs into the charging interface.
3.
Wet the scope with Isopropanol on all sides.
4.
Let the liquid work for one minute.
5.
Then wipe the scope dry with a microfibre cloth.
6.
Wait another five minutes to allow all residual Isopropanol to evaporate.
7.
The procedure can be repeated if necessary.
8.
The scope can be used again.
Warning!
The scope should not be sterilized!
essent
im
is not approved for sterilization
processes of any kind, as both thermal and chemical processes can destroy the
scope and can lead to property damage and personal injury!
Maintenance and Repair
Checking the measuring accuracy
To determine the accuracy of the measurement, we recommend carrying out an annual
meteorological feedback.
Replacement of Gecko-strip
1.
Peel of the Gecko-strip from the scope housing (do not use sharp objects that could
damage the housing).
2.
If necessary, remove any adhesive residue with a microfibre cloth soaked in
Isopropanol.
3.
Wait for the splice to dry completely.
4.
Apply the new Gecko-strip to the cleaned recessed splice on the back of the scope.
5.
Peel off the protective foil from the Gecko-strip.
Malfunction
In the event of a malfunction, please contact
essent
im
GmbH.
[email protected]
www.essentim.com
16
user manual scope - version 1.1
