LED function
The red and green LEDs provide feedback on the current situation of the scope.
In principle, the red LED indicates a problem (exception when switching off), while the green
LED indicates an activity.
Action
Flash code
LED colour
switch on
„long short short short” flashing
GREEN
data transmission
short flashing once
GREEN
advertising / discoverable mode
regular short flashing
GREEN
bluetooth connect
fast regular flashing
GREEN
read memory
very fast flashing / flickering
GREEN
charging
slow flashing
GREEN
fully charged
permanent light
GREEN
identify scope
very fast flashing
GREEN
error
short flashing
RED
switch off
“long short short short“ flashing
RED
data transmission without time set
short flashing once
RED
Find / Identify scope (App)
With the app it is possible to set a flash for 15 seconds at the scope. This simplifies e.g. to find
the right sample in the incubator or simply to identify the correct scope. This feature must be
done via app.
Memory (App)
All measurement data is automatically stored on the local memory. If the scope is e.g. outside
the receiving range of the sensor network (scouter), data security is still ensured.
Note
The data is only stored in memory if the time has been set on the scope. The
time is set as soon as the scope is located in a sensor network or connected to
an app.
The memory holds about 100.000 measuring points. Depending on the measurement interval,
this represents a period of one month to one year.
13
user manual scope - version 1.1
