Commissioning
When using the scope for the first time, the following steps must be taken:
1.
Fully charge all scopes before the first use. A fully charged scope signals the completed
charging process with a continuous green LED.
2.
If the scope is not yet switched on, press the button briefly to start the scope.
3.
Seal the interface with the supplied anti-dust plug.
4.
Remove the protective foil from the Gecko-strip on the back of the scope.
Note
To use the battery effectively, the scope should always be fully discharged and
then fully charged.
Warning!
Only use
essent
im
accessories to charge the scope.
11
user manual scope - version 1.1
