installation
46
V.1.0
unpacking
•
Remove the transportation packaging.
•
Check that the appliance has not been damaged during transport. You should
never connect a damaged appliance! If the appliance is damaged, please
contact your retailer.
•
Remove all adhesive tape and packaging materials from the appliance's interior
and exterior.
Before first use
•
Clean the interior of the appliance and all accessories provided using warm
water and a small amount of white vinegar. Do not use soap or detergent as the
smell may persist. After cleaning, make sure to completely dry the appliance.
•
You can use
mineral spirits to remove any adhesive left on the appliance's
exterior.
•
You should always disconnect the appliance, or remove the fuses/switch
off the circuit breaker when cleaning the appliance.
installation
Where to install
•
Position your appliance on a stable, flat surface. Your appliance will become
heavy once it has been loaded with food and must be placed on a solid and
resistant floor.
•
The appliance must be installed in a dry, well-ventilated room at ambient
temperature (minimum
10°C
and maximum
43°C
).
•
The appliance should not be exposed to direct sunlight.
•
The appliance should not be exposed to rain.
•
The appliance should not be installed next to a radiator, stove or any other heat
source.
•
The power consumption and effective functioning of this appliance are
affected by the ambient temperature.