V.1.0
V.1.0
20
charging the battery
21
before fi rst use
Installing the wall mount
The supplied hardware kit includes wall plugs for solid walls (example: concrete, solid brick,
stone, etc.) .
1.
Place the mount against the wall in the desired location near an electrical outlet. Make
sure that the mount is the same height as the vacuum cleaner.
2.
Mark each of the four holes in pencil. Use a spirit level to ensure that the mount is
perfectly level.
3.
Drill the four holes using a 6mm diameter concrete drill.
4.
Insert the four plugs provided into the four holes.
5.
Place the mount against the wall and screw the 4 screws through the mount.
6.
The wall mount has a winder and a cable entry that hides the cable as much as possible.
Be careful not to pinch or crush the cable between the plastic parts and the wall when
tightening the four screws of the mount.
Check the nature of the partition or wall you want to attach the charging
mount to. Make sure the supplied hardware is compatible.
Otherwise, use expansion screws and plugs suitable for the type of partition or
wall (special hollow walls, plasterboard - type BA13, hollow brick, etc.).
These
are notprovided in the packaging
.
!
charging the battery
After attaching the mount to the wall, plug the power supply into an easily accessible wall outlet.
Snap the vacuum cleaner onto the mount at the charging connector.
CHARGE LEVEL INDICATOR
The
warning light
on the motor unit around the “Boost” button indicates its status.
- If it is
fl ashing blue
, the battery is charging
- If it is
off
, it means that the battery is fully charged.
WARNING: Do not recharge the battery more than
necessary to avoid reducing its life.
•
If you do not use the appliance for a long time or if the battery is completely discharged, its
performance may be reduced. It is recommended to charge (for 6 hours) and completely
discharge the battery 2 to 3 times during the fi rst use.
Battery life after 4 hours of charging:
-
Low speed: 25 minutes
-
Fast speed (“ Boost ” function) : 12 minutes
Charging time for the fi rst 3 uses
: 6 hours
Typical charge time
: 4 hours
