1
Take one of the Rear Extension Bars (D) and insert the end without the gold button into the threaded connector
female end of the Front Extension Bar (C), slide to desired length and partially tighten the threaded connector.
Repeat with remaining parts (C) and (D). These are going to be called “Extension Bar Assemblies” for the
remaining steps.
Assembly Instructions
2
Take the Hand Bar (A), while pressing in the gold button, slide the female end of the T-Bar (B) over Part (A). Slide
to desired length and ensure the gold button is protruding from an adjustment hole. Hand tighten connector.
Repeat with remaining Parts (A) and (B).
x 2
x 2
Completed parts from this step:
Completed parts from this step:
x 1
x 2
3
Take one of the extension bar assemblies created in Step 1. While pressing in the gold button on Part (C) of the
assembly, slide Part (B) over Part (C) until the button engages. Repeat the process with the other side.
Completed parts from this step:
