background image

The Endurance

®

 Hand Rail is not intended or designed to keep the user confined to bed. If the 

user is at risk to roll out of bed, a hospital style bed rail should be used. The Endurance

®

 Hand 

Bed Rail is designed to help the user get in and out of bed safely.

Ensure Endurance

®

 Hand Rail fits snugly against mattress and box spring to prevent potential 

user entrapment. 

ALWAYS use the Securing Strap, failure to properly attach the Securing Strap can lead to 

serious injury or death.  After installation periodically check that the Securing Strap is tight and 

not leaving a gap between the mattress and Hand Bed Rail.

WARNING

User Weight Limit:

300 lbs.

ESSENTIAL MEDICAL SUPPLY, INC. LIMITED WARRANTY

Essential Medical Supply, Inc. (“Essential”) warrants its products free from defects in materials and workmanship (“Warranty”) for a Limited Lifetime from 

the date of purchase (“Warranty Period”). The Warranty extends only to the original purchaser of Essential products. If within the Warranty Period there is 

a breach of Warranty as to an Essential product, such product shall be repaired or replaced at Essential’s sole discretion. This Warranty does not include any 

labor or shipping costs incurred in replacement, part installation, or repair of any Essential product. ESSENTIAL’S SOLE OBLIGATION AND YOUR 

EXCLUSIVE REMEDY UNDER THIS WARRANTY SHALL BE LIMITED TO REPAIR AND/OR REPLACEMENT OF THE DEFECTIVE 

ESSENTIAL PRODUCT.

For Warranty service, please contact the dealer from whom you purchased your Essential product. In the event you do not receive satisfactory Warranty 

service, please write Essential directly at:

 

 

 

Essential Medical Supply, Inc.

   Customer 

Service 

Department

 

 

 

6420 Hazeltine National Drive

   Orlando, 

FL 

32822-5121

Please provide the dealer’s name, address, and date of purchase, and indicate the nature of the problem and the Essential product serial number.

Upon receipt of written notification, Essential will issue a return authorization. The defective unit or parts must be returned to Essential for Warranty 

inspection using the serial number as identification within thirty (30) days of the date of return authorization. DO NOT return products to Essential 

without Essential’s prior written consent. Cash on delivery shipments will be refused and shipping charges must be prepaid.

Limitations and Exclusions: The Warranty shall not apply to products if 1) the Essential serial number has been removed or defaced; 2) the product has 

been damaged by negligence, accident, improper operation, maintenance or storage; and/or 3) the product has been modified without Essential’s express 

written consent or repaired by an unauthorized third-party (“Warranty Disqualifying Events”) include but are not limited to the addition of unauthorized 

parts or attachments or damage caused by circumstances beyond Essential’s control, the occurrence of which shall be determined exclusively by Essential. 

The Warranty also shall not apply to problems or defects arising from normal wear and tear on Essential products and parts, including but not limited to 

rubber tips and hand grips, and failure to adhere to user instructions and safety precautions.

THE WARRANTY STATED HEREIN IS THE SOLE AND EXCLUSIVE WARRANTY OFFERED BY ESSENTIAL. THERE ARE NO OTHER 

WARRANTIES RESPECTING ESSENTIAL’S PRODUCTS, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO 

ANY WARRANTY OF DESIGN, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE, EVEN IF ESSENTIAL HAS BEEN 

INFORMED OF SUCH PURPOSE. NO AGENT OF ESSENTIAL IS AUTHORIZED TO ALTER OR EXCEED ESSENTIAL’S WARRANTY 

OBLIGATIONS AS SET FORTH HEREIN. ESSENTIAL SHALL NOT BE RESPONSIBLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, OR 

CONSEQUENTIAL DAMAGES ARISING OUT OF USE OF ESSENTIAL PRODUCTS.

NOTE: Warranty voids if Serial No. label is removed or destroyed.

Product Serial No.

8

Take the male end of Part (G) and loop it over and 
around the top of Part (F), back towards yourself.

9

Lift the box spring to expose the bed frame and loop 
the male end of Part (G) under and around the bed 
frame towards the female end. Engage the buckle 
and tighten Part (G) by pulling on both loose ends.

Mattress

Box Spring
Bed Frame

Buckle

Securing Strap

Bed Rail

Summary of Contents for Endurance P1411

Page 1: ...l is tight against the mattress and at least 12 from both the head and footboards Periodically check to ensure Home Bed Rail has not moved and is secure ALWAYS use on a standard home bed not for use on toddler bunk water hospital or inflatable beds KEEP these instructions failure to follow these instructions could lead to serious injury or death If any part of the Home Bed Rail is damaged disconti...

Page 2: ... the Hand Bar A while pressing in the gold button slide the female end of the T Bar B over Part A Slide to desired length and ensure the gold button is protruding from an adjustment hole Hand tighten connector Repeat with remaining Parts A and B x 2 x 2 Completed parts from this step Completed parts from this step x 1 x 2 3 Take one of the extension bar assemblies created in Step 1 While pressing ...

Page 3: ... Part F until the gold buttons on Parts D engage Tighten the threaded connectors on Parts C x 1 Completed parts from this step x 2 Completed parts from this step 6 Now that the Hand Bed Rail is completely assembled slide the unit between the mattress and the box spring at the desired location Adjust the height of Part E by pressing in the gold buttons on Part B and sliding down Ensure that both Pa...

Page 4: ... returned to Essential for Warranty inspection using the serial number as identification within thirty 30 days of the date of return authorization DO NOT return products to Essential without Essential s prior written consent Cash on delivery shipments will be refused and shipping charges must be prepaid Limitations and Exclusions The Warranty shall not apply to products if 1 the Essential serial n...

Reviews: