Connections
Integrating your new Mains Multiplier is as easy as can be.
Just connect the Mains Multiplier to your wall socket. Don’t bother about the phase of the
wall socket, you don’t have to check it. The Mains Multiplier 6+ (figure 1) and the Mains
Multiplier 8+ (figure 2) do have a phase indicator inside which gives the following
indications:
no power
power on
power on
power on
false phase
phase ok
no earth connected
If you get a false phase indication by a red light, you should reverse the power cable plug
in the wall socket. You will see that both indicators will light green which means that power
is on and phase is ok.
For countries with an earth pin in the middle of the wall socket (France, Belgium) it is not
possible to reverse the power cord plug in the wall socket. You should ask a technician to
reverse the neutral and phase in your wall socket, NOT in your power cord. Don’t do this
yourself, the mains voltage is dangerous!
Figure 2. Phase indication Mains Multiplier 8+
no power
power on
no earth connected
power on
false phase
power on
phase ok
Figure 1. Phase indication Mains Multiplier 6+
6.