SETTING UP THE S5
22
WeR@Home™ S5 User Guide
5.
Tap
. The scanning window appears.
6.
Scan the QR code inside the battery compartment. Follow the onscreen instructions.
7.
Insert the batteries into the door/window sensor, observing the correct polarity.
WARNING!
A new battery may explode if incorrectly installed. Use only the
same or equivalent battery type recommended by the manufacturer.
8.
To install with screws, refer to Appendix A Installing with Screws on page 33.
9.
Place the door/window sensor against the wall mount and press until the door/window sensor
clicks into place.
10.
Peel one side of a tape and affix it to the back of the wall mount.
