12/5/2006
EIG-8O Gateway Administration Guidelines
MAG-06008 Rev. A
STUN
Select
on
to turn on STUN service or
off
to turn off STUN service.
STUN Server
In
STUN Server
field, enter the IP address of the STUN Server. A STUN server can send requests as
well as generate responses. STUN server normally runs in public network and therefore is stateless. If
this field is empty, the default STUN server will be used.
RADIUS Client
Select
on
(to invoke) or
off
(not to invoke) to indicate to turn on or not the charging function of RADIUS
client.
RADIUS Server
Select
on
(to invoke) or
off
(not to invoke) to indicate to turn on or not the charging function of RADIUS
server.
RADIUS Start
Select
on
or
off
to indicate whether or not to transmit the initial RADIUS record when the charging
function of RADIUS client or server is invoked.
RADIUS Unsuccess Stop
Select
on
or
off
to indicate whether or not to transmit RADIUS record of the unsuccessful calls when
the charging function of RADIUS client or server is invoked.
Primary Server
In
Primary Server
field enter the IP address and the port of the primary RADIUS server. If no port is
set, then the default port 1813 will be used.
Key
In
Key
field enter the share key for the communication between primary RADIUS client and server.
Make sure the settings of both sides are consistent.
Secondary Server
In
Secondary Server
field enter the IP address and the port of the secondary RADIUS server. If no
port is set, then the default port 1813 will be used.
Key
In
Key
field enter the share key for the communication between secondary RADIUS client and server.
Make sure the settings of both sides are consistent.
Timeout
In
Timeout
field the default setting is 3 seconds.
Retries
In
Retries
field enter re-transmit times when the charging function is not responding. The default
setting is 3 seconds.
40
