12/5/2006
EIG-8O Gateway Administration Guidelines
MAG-06008 Rev. A
first sign up for the Do Not Disturb services. Please refer to 4.9.
Set Speed Dial
The default function key is *74. This allows the customer to use a two-digit code (from 20 to 49) for
dialing the complete digits. To use this feature the customer needs to sign up for speed dial services.
Set Dial Prefix
This defined the identifiers for speed dial. The default function key is **. Before using the speed dial,
the customer must first dial these two digits.
For example:
The speed dial code for phone number 5613221680 is 20, and the speed dial prefix is ** .
․
To enable speed dial:
Go off hook
→
Dial *74
→
On hearing the dialing tone, dial 20 plus 5613221680
→
Dial # to end.
․
To verify:
Go off hook
→
Dial *74
→
On hearing the dialing tone, dial 20 plus * to end
→
On hearing the
complete digits, go on hook.
․
To use the speed dialing:
Go off hook
→
Dial ** plus 20.
․
To disenable:
Go off hook
→
Dial *74
→
On hearing the dialing tone, dial 20 plus # to end.
Call Park
On analog phones on MGCP adapters, press flash-hook or Cnf/Tm, then press *98(the call park code)
and dial the extension where you want to park the call. Then hang up after your hear the confirmation
tone.
Listen IP Address
This allows the customer to hear the IP address of his phone line. The default function key is ##.
Enable Line Search
This allows the customer to hear the phone number of this his phone line. The default function key is
#00.
Listen to PPPoE IP Address
This allows the customer to hear the gateway PPPoE IP address. The default function key is #01.
Set Distinctive Ring
This allows the customer to set the ring tones to his liking. The default function key is *80.
Cancel Distinctive Ring
This restores the ringing tone to normal. The default function key is #80.
For example:
24
