12/5/2006
EIG-8O Gateway Administration Guidelines
MAG-06008 Rev. A
Figure 3. T568B wire pairing scheme
3.
After lining up wires to the correct pin positions, trim all the twisted pairs with a cable cutter,
leaving 15mm leads exposed. Then follow Figure 3-3 by inserting wires to their corresponding pin
position in the plastic shell of RJ45 connector. Pin 1 will house white orange wire, etc.
Figure 4. RJ 45 Wiring
4.
After wires have been properly inserted into RJ45 connector; a cramping tool can secure the
wires to the connector and make connections to the metal pins as shown in Figure 5.
Figure 5. Finished RJ 45
8
