Page 9
HOT WATER
Hot Water Option
-
Remove left hand side panel
-
Remove rear panel
-
Pull back insulation to expose outlets
-
Pipes can exit side or rear of your Bakeheart
-
Use hemp and paste or high temperature thread sealant to
connect to hot water jacket
-
Punch out appropriate pipe outlets in panel
-
Replace panels
NOTE
If Bakeheart has a hot water jacket installed, it must be connected to an
appropriate hot water service before use.
Lighting your stove prior to this will void your warranty and
damage your stove.
Hot water connection 25mm Fi BSP
Can reduce to 20mm
