Esse-ti ST50 DECT, User Manual

Page: 60 / 88

60 SETTINGS
S
UBSCRIBING A HANDSET TO THE BASE STATION
This procedure allows the handset’s subscription to the Base Station.
A new handset must be registered to the Base Station before being used. The
included handset is registered to the Base Station by the factory.
When the icon is displayed, the handset is correctly registered to the Base
Station.. If the icon is missing or blinking, it’s necessary to perform the
subscribing procedure to the Base Station.
To allow the correct handset’s subscription, the Base Station must be set in
registering mode:
¾
Press the PAGE button on the Base Station for 5 seconds.
The led of the Base Station starts blinking.
¾
In standby mode to access the menu, press the key.
The CALL LOG option is displayed.
¾
Select REGISTRATION by pressing the key.
¾
Press the key to confirm.
The BASE 1 option is displayed.
¾
Use the Down and Up keys to select the desired Base
Station.
¾
Press the key to confirm.
The text SEARCHING X, with X indicating the selected Base Station, is
displayed. If the radio signal is properly received from the Base Station, the
PIN? option is displayed.
¾
Type the PIN number of the Base Station (0000 is the factory default).
¾
Press the key to confirm.
If the handset is correctly registered to the Base Station the handset generates a
confirmation tone and the text HS X, with X indicating the handset
identification number (1 ~ 5), is displayed.