Esse-ti ST50 DECT, User Manual, Page: 55 / 88

Installation 55
INSTALLATION
Base Station
¾
Plug one end of the adapter into the power outlet and the other end into
the adapter jack on the back side of the Base Station.
¾
Connect one end of the telephone cord with the wall phone jack (RJ-11)
and the other end to the back side of the Base Station into the line cord
in.
After you install the Base Station, the handset is ready.
If the icon is displayed the handset is correctly registered to the Base Station.
If the icon is missing or blinking, there’s no radio link or the handset is not
registered to the Base Station.
If the text “UNREGISTERED” is displayed, the handset is not registered to the
Base Station.
IN ORDER TO SUBSCRIBE THE HANDSET TO THE BASE STATION
FOLLOW THE INSTRUCTIONS ON PAGE 60 OF THIS MANUAL.
Batteries in Handset
The handset works with 2 Ni-MH 1,2V (AAA) rechargeable batteries. The
included batteries must be charged before use.
¾
Open the battery compartment.
¾
Put 2 rechargeable batteries (1,2V AAA) in the battery compartment.
¾
Close the battery compartment.