Esse-ti GSM500 M2M, User Manual

Page: 13 / 28

Page 13
Device mounting operations

Check the GSM signal strength through the green indicator LED
(see chapter “SIGNALS”, page 22) and identify an area where the
signal is strong enough.
Note: the signal strength may vary according to the
telephone provider.

Drill two holes with 5 mm diameter on the wall at a distance of 50
mm.

Insert the 2 wall plugs and screws down until the screws are at a 5
mm distance from the wall.

Place the GSM500 M2M device onto the two screws through the
two back slots.