Esse-ti GSM400, User Manual, Page: 13 / 56

Page 13
PROGRAMMING VIA
TELEPHONE
Allows you to customise the gateway according to your requirements.
Programming can be carried out locally via a MF telephone.
You can programme:

voltage of telephone line;

use mode;

interdigit dialling time;

country calling code and international call prefix;

CLIP/CLIR settings;

roaming service settings;

notifications telephone number;

administrator telephone number ;

programming-mode password;

low-battery check;

automatic converter of selected telephone number;

receiver gain adjustment;

transmitter gain adjustment.
Note: during programming, the interdigit dialling time must
not exceed the time set during the “Interdigit dialling
time” programming. Once this programmed time has
elapsed you will hear the dissuasion tone and you will
have to hang up.
Note: at the end of each programming carried out correctly,
you will hear a confirmation tone, while an error tone
will be heard in case of error. In any case, the
dialling tone will follow, after which you can proceed
with the programming or make a call.